Blast chiller 12 trays GN 1/1 GO series

Professional blast chiller with 12 trays gn 1/1 GO series by Friulinox that allows blast chilling of both cooked and raw foods. 

External sides, top and door in  AISI 304 18/10 stainless steel Scotch-Brite satin finish with high density polyurethane's insulation (about 42 Kg/m3) without HCFC. Interior fully lined in stainless steel with rounded corners and moulded base with central drain for discharge of washing water. Full height ergonomic handle and magnetic seals on the 4 sides of the door. Self-closing door with block in open position at 100° and possibility to choose the opening side. Inside, you will find 18/10 stainless steel shelf or tray racks encased on the sides of the chamber easily removable for washing. The tray spacing is 6.5 cm.

The cooling system is composed of indirect-flow electric fans, hermetic compressor, evaporators with large exchange surfaces for high cooling efficiency. Manual defrosting device and condensate evaporation systems without use of electrical energy. High capacity liquid/gas heat exchange.

The functions of this outstanding blast chiller are numerous:

• High visibility LCD custom display

• Pre-cooling button

• SOFT/HARD blast chilling by time or core probe with automatic recognition if inserted in the product

• Customizable blast chilling cycles (99 cycles can be memorized)

• Infinite timed cycle with adjustable chamber set-point

• Automatic holding at the end of the blast chilling cycle

• Timed manual defrosting

• Connection via interface card to printer or PC (HACCP)

• Compressor protected by thermal overload cut-out with automatic reset

The evaporator coil is made of copper-aluminium with cataphoresis coating in non-toxic epoxy resin, while the condenser coil is made of copper with aluminium fins for high thermal efficiency. Flag-opening deflector on hinges for evaporator cleaning. The anti-condensation heater is placed on the frame under the magnetic gasket seal.

R404A refrigerant.

TECHNICAL FEATURES:

                                                                       BC121 DG                        BC121 AG                        

Blast chilling performance (max 90 min):  25 Kg +90°C/+3°C          36 Kg +90°C/+3°C         

Cooling power:                                              1897 Watt                        3212 Watt                         

Absorbed power:                                           1342 Watt/6,58 A           1792 Watt/4,82 A           

Voltage:                                                          230 Volt/1/50 Hz            400 Volt/3/50 Hz            

Dimensions:                                                   79x80x180(h.) cm          79x80x180(h.) cm            

Weight:                                                           188 Kg                             188 Kg                              

Tray spacing:                                   6,5 cm                              6,5 cm                               

STANDARD EQUIPMENT: one core probe and a pair of removable side tray supports in stainless steel wire.

When in stock, the delivery time for the product is 1-3 working days. For pre-orders (products that are not in stock, but can still be ordered on the website), times may vary depending on supplier availability.